Aplications

Machinery Applications

PFC520 Fusing and Creasing Machine

This machine is run from single phase electricity with heater capacity of 3Kw at 12 amps.

The fusing belts are 52cm x 83cm with a return belt to take goods back to the operator.

PFC320 Fusing and Creasing Machine

This machine is run from single phase electricity with heater capacity of 2Kw at 8 amps.

The fusing belts are 32cm x 45cm with a return belt to take goods back to the operator.

The above machines can be used for doing both fusing and creasing on woven and non-woven material and listed below are the type of goods and operations the machines are suitable for:

Fusing:

Shirt collars and cuffs, plackets and yokes
Blouse collars, cuffs and plackets
Suit and Jacket fronts
Trouser waistbands and belt loops
Finer fabric can be fused in multiple layers
Generally all small fused parts that can be accommodated by the width of each machine

Creasing:

Shirt pockets, plackets, epaulettes, sleeveguards (square and pointed)
Blouse pockets and plackets
Suit pockets
Trouser pockets and waistband turning

(Pockets – all shapes and sizes can be produced by using our pocket jigs, these include, round, square, mitred and pointed, round with a central point, bellow pockets, side insertion pockets and jean type pockets).

PF400 Fusing Machine

This machine is run from single phase electricity with heater capacity of 3Kw at 12 amps. The fusing belts are 32cm x 83cm. It is also fitted with a silicone roller to which the other steel rollers are pressed down onto. The machine has been designed to operate on a higher speed of fusing which is ideal for trouser waistbands and if fitted with the PTR2 Twin Variable Tension Rewind Unit it is ideal for manufacturers requiring waistbands on roll for attaching to trousers.

Generally all small fused parts that can be accommodated by the width of the machine but with a higher speed capacity.

PF100 Belt Loop Fusing Machine

This machine is run from single phase electricity with heater capacity of 1Kw at 4 amps. Fusing belts are 5cm x 30cm.

This machine is aimed directly at fusing belt loops on trousers and has a guide system that will allow the majority of twists on the pre-entry to the machine to be taken out.

Pinning Tables

A single phased machine with a 50W motor only. The machine is designed for aligning striped, checked or various patterns layer on layer at a low level to the height of the pin, as explained in our leaflet.

(The price of the tables are dependent on the size of the table required)